Midgard Industrial

Anodize Solutions

Tualatin, OR, United States anodizesolutions.com

Anodize Solutions provides anodizing and related surface finishing for aluminum parts. It serves one part or thousands from Tualatin, Oregon.

What they offer

  • Soft Anodize Type II

    Decorative anodize for cosmetic color and general-purpose durability.

  • Hard Anodize Type III

    Anodize for high-wear and higher abrasion or corrosion resistance applications.

  • Anoptical Anodize

    Inorganic black anodize for UV stability, reduced reflectance, and vacuum use.

  • Bright Dip

    Pre-anodize chemical etch to improve gloss and produce high-gloss finishes.

  • Media Blasting

    Blasting to create textured or matte-to-satin surface finishes before anodizing.

  • Masking and Plugging

    Protects areas that need to remain free of anodize coating.

  • Acid Etch

    Chemical pretreatment to modify the final cosmetic finish before anodizing.

  • Surface Roughness Measurement

    Measures Ra/Rz for surface verification.

What they work on

Processes
Anodizing · Soft anodize · Hard anodize · Bright dip · Acid etch · Media blasting · Shot blasting · Masking · Plugging · Surface roughness measurement
Materials
Aluminum · 6000 series aluminum · 5000 series aluminum · 7000 series aluminum · 2000 series aluminum · Mic 6 tooling plate · 6061 · 5052 · 7075
Equipment
15,000 square foot facility · 2 chillers · 2 boilers · 2 air compressors · 2 hoists · 3 RO units · 8ft hoist line · 4ft hand line · Four 8ft/600 gal tanks · 3000 amp rectifiers · Four 4ft/400 gal tanks · 1000 - 1500 amp rectifiers
3 more500 - 1000 amp rectifiers · Two 2ft/100 gal tanks · 200 amp rectifiers
Capacity
One part or a million · Single part or thousands · 8ft hoist line for high volume parts · 4ft hand line for tricky parts · Small batches of parts · Large batches of parts
Turnaround
Standard leads times are typically 3-5 days
What to send
Drawings or parts · Print if critical dimensions must be held · Pre-anodize dimensions if available · Color sample to match, if available · Locations where parts can or cannot rack
Minimums and prices
No charge for certs

Company

Type
Finishing shop
Sites
Tualatin, United States
Quality
Mil 8625 Type II (Soft anodize and class 1/class 2 anodize) · Mil 8625 Type III (Hard anodize and class 1/class 2 anodize) · FFL license (full anodize service for armament manufacturers)
Serves
Europe, Asia, USA
Address
12620 SW Leveton Drive Tualatin, OR 97062 Anodize Solutions
Founded
2015

Similar shops

Work here? Claim this listing